[WT-support] problem comunication WT via micoHAM USB III -IC7700

[Tõnno Vähk]

Actually ES5RY was having problem to get IC756 PROIII CAT to work. USB Router shows frequency and everything is fine but Win-Test does not read CAT.

He used MK2R+ and settings:

19200, 8, N, 1. Address 50h. No settings in WT worked (CI-V on/off, handshake, always on/off, tried 4800 rate in the rig and USB router...)

Any idea why WT might not read CAT while all fine in USB router? (same port of course and USB router says port opened)

Can it be the problem of the address? Is 50h correct for PRO III?

73
Es5tv

From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On Behalf Of Bob Wilson, N6TV
Sent: Tuesday, October 26, 2010 12:13 PM
To: support at win-test.com
Subject: Re: [WT-support] problem comunication WT via micoHAM USB III -IC7700

On Mon, Oct 25, 2010 at 9:44 PM, sp7idx <sp7idx at interia.pl<mailto:sp7idx at interia.pl>> wrote:
 CI-V Baud Rate 19200
CI-V Address 7Ah   <<<<<<<<<<<<<
CI-V Transceive ON
Decode Baud Rate 19200

After several private messages back and forth, I finally noticed that this not the default CI-V  address for an IC-7700.

Waldi changed the CI-V address back the default, 74h, then Win-Test worked fine.

73,
Bob, N6TV
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101026/ab9e6c69/attachment.htm