[WT-support] Advanced SO2R mode on phone doesn't work well right now

[José Nunes CT1BOH]

There are three ways to move focus

1. Shift Key (have to keep pressing it to keep focus on the secondary radio)
2. Caps lock key (once it is "on" the focus in on the secondary radio and
remains there until the key if "off")
and (3. Using scripts in messagens to automatically control focus (need
programming scripts))

These are features of advanced SO2R specifications!

73 José Nunes
CT1BOH

On Wed, Oct 20, 2010 at 10:23 AM, Mikael Larsmark <mike at sm3wmv.com> wrote:

> Ok Bob,
>
> But I hope that doesn't mean that as long as you have Caps lock assigned
> you will call on the 2nd radio. Because if that is the case I'd rather
> need to press the * key to shift mic focus. Since this would be a big
> problem typing in calls in SO2R mode during actual qsos on the 1st radio.
>
> Can't this just be triggered if wanted with the TR2 macro? I mean after
> you have sent F4 you just add TR2 and focus will be on radio 2?
>
> Mike, SM2WMV (SJ2W)
>
> Bob Wilson, N6TV wrote:
> > Normally you can press CapsLock to move data entry focus to the
> > secondary radio window (it gets highlighted in yellow), and then press
> > F4 or Enter (in ESM mode) to send your callsign on the secondary radio.
> > That works OK on both CW and Phone.  No need for $TR1 or $TR2.
> >
> > Now, from that point on, on CW, sending with the paddles transmits on
> > the secondary radio.  But right now, speaking into the mic. does /not/
> > transmit on the secondary radio, and that is the bug.
> >
> > So right now it is impossible to operate a serial number contest such as
> > WPX phone, using Advanced SO2R techniques, because the serial number
> > forces you to use the mic.  The only way to to do it is swap
> > transmitters first, by pressing star [ * ], as explained below.
> >
> > For CQ WW Phone where the exchange is the same for all contacts, you can
> > just press F4 and F2 for S&P, but if you get asked a question, and want
> > to reply by speaking into the mic., you have to hit the star key first,
> > otherwise you will transmit on the wrong radio.
> >
> > I hope this can be fixed.
> >
> > 73,
> > Bob, N6TV
> >
> > On Tue, Oct 19, 2010 at 3:27 PM, Mikael Larsmark <mike at sm3wmv.com
>  > <mailto:mike at sm3wmv.com>> wrote:
> >
> >     Hello lads
> >
> >     I wonder how this would work? I mean how would you move focus from
> radio
> >     1 to radio 2 when being in the 2nd radio window? Maybe just put TR2
> >     after F4 message is sent?
> >
> >     Mike, SM2WMV (SJ2W)
> >     http://www.sj2w.se
> >
> >     Bob Wilson, N6TV wrote:
> >      > Using Advanced SO2R mode with DVK messages works OK if you want
> >     to make a
> >      > call on the secondary radio window by pressing buttons, but if
> >     you want to
> >      > speak something into the Mic., it just doesn't work at all.
> >      >
> >      > See task #264
> >     <http://flyspray.win-test.com/index.php?do=details&id=264
> >     <http://flyspray.win-test.com/index.php?do=details&id=264>>,
> >      > opened almost a year ago.
> >      >
> >      > I think there must be a lot of single ops that would like to see
> >     this bug
> >      > fixed before CQ WW Phone, so that Win-Test works the same on
> >     phone as it
> >      > does on CW.
> >      >
> >      > In the mean time, the only work around is to press the [ * ] key
> >     before you
> >      > speak into the microphone, but that sort of defeats the purpose
> >     of Advanced
> >      > SO2R.
> >      >
> >      > Hopefully the developers will be able to look at this problem
> >     before CQ WW
> >      > Phone.
> >      >
> >      > 73,
> >      > Bob, N6TV
> >      >
> >      >
> >
> >
> >
>  >
> ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>



-- 
-- 
José Nunes
CONTEST CT1BOH - http://www.qsl.net/ct1boh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101020/294136ad/attachment.htm