[WT-support] WT through VPN

Patrick 9A5CW pat.9a5cw at gmail.com
Thu Oct 14 16:24:11 CEST 2010


Hi Hamad,
see this: http://www.f5mzn.org/pipermail/support/2007-July/074026.html
Hope it helps.
73, 9A5CW

On Thu, Oct 14, 2010 at 4:14 PM, Carlos Neves (CT3FQ) <ct3fq at ct3team.com>wrote:

> Hi Hamad,
> I'm not sure,  Hamachi network  broadcast address will be 5.255.255.255 but
> I don't know if they drop UDP packets over their routers ...?...
>
>
>
> 73
>
>
>
> On 10/14/2010 11:10 AM, Hamad 9K2HN wrote:
>
> I just downloaded and installed Hamachi (Logmein) and i got ip address for
> each pc, but which ip i have to use in WT? and what configuration i have to
> use (Mesh or Gateway)?
>
> de 9k2hn
> Hamad
>
> On Thu, Oct 14, 2010 at 12:01, ced <lamc1 at free.fr> wrote:
>
>> hello, you can use Hamachi VPN software it works good with WT and very
>> easy to configure and use.
>>
>> 73 ced F4EGZ
>>
>> Le 14/10/2010 10:23, Carlos Neves (CT3FQ) a écrit :
>>  >    I have tested OpenVPN ( http://www.openvpn.net/ )  running in a
>> ASUS
>> > 500GP router (with a USB UMTS internet access device connected ) as VPN
>> > server. For the clients I use  "OpenVPN GUI for Windows" and It works
>> > with win-test  over internet.
>> >
>> > 73
>> >
>> >
>> > On 10/14/2010 5:46 AM, Peter Stuge wrote:
>> >
>> >> Bob Wilson, N6TV wrote:
>> >>
>> >>> I imagine you would have to configure the same broadcast address
>> >>> and port number in both copies of Win-Test, as usual, and that
>> >>> broadcast address has to be compatible with the VPN address that
>> >>> you set up (e.g. broadcast address *x*.*y*.*z*.255 on both computers).
>> >>>
>> >> Very important point! Since broadcast is being used, traffic can only
>> >> pass switches and not routers. Make sure that the two machines are on
>> >> the same ethernet network segment, and if you really do need a VPN
>> >> solution then make sure it can pass broadcast traffic.
>> >>
>> >> Some VPN solutions are only layer 3, meaning that the VPN client
>> >> and/or server acts just like a router, and can not pass broadcast
>> >> traffic across the link.
>> >>
>> >>
>> >> //Peter
>> >> _______________________________________________
>> >> Support mailing list
>> >> Support at win-test.com
>> >> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>> >>
>> >>
>> > _______________________________________________
>> > Support mailing list
>> > Support at win-test.com
>> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>> >
>>
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>
>
> _______________________________________________
> Support mailing listSupport at win-test.comhttp://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>


-- 
9A5CW - Patrik Hrvatin
--... ...--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101014/9904c711/attachment.htm 


More information about the Support mailing list