[WT-support] Speed jumps up occasionally

[Georgek5kg at aol.com]

Tnx Wolfgang.  I prefer to use the CW Keyer and K1EL chip, so I hope  to 
get a clean solution to this curious problem.
 
73, George.
 
George  Wagner, K5KG
Sarasota, FL 
941-400-1960 cell  

 
In a message dated 11/29/2010 9:27:29 A.M. Eastern Standard Time,  
ws at dk9vz.com writes:

Hi  George,

I had exactly the same issue
I went over to drive CW trough  RS-232 with my K3 and WinTest
without any Microham or other K1EL-Chip and  it works perfectly ...

/*73 de*/
/*Wolfgang DK9VZ*/
ws at dk9vz.com  <mailto:ws at dk9vz.com>


Am 29.11.2010 15:21, schrieb  Georgek5kg at aol.com:
> Here is a question for both the WT and Microham  support reflectors:
> I find that occasionally the speed will jump up  many wpm when I send a 
> "TU K5KG" message from the "+" key.  I  will be running and running, 
> and sending TU K5KG with the + key QSO  after QSO.  Then, every now and 
> then, when I send TU K5KG from  the + key, the speed will jump up to 
> lightning fast (maybe 50  wpm).  I'd appreciate any ideas as to why 
> this happens, and what  to do to prevent it.
> Here is my current set up:  Microham CW  Keyer, WinTest 4.6, 
> K3.  Although, this is my current set up,  the speed jump up also 
> happened with WT 3.n and an Icom Pro3.   Bottom line, it has been 
> happening for several years.  The  common elements seem to be WT and 
> the CW Keyer.
> 73, George,  K5KG
> George Wagner, K5KG
> Sarasota, FL
> 941-400-1960  cell
>
>
>  _______________________________________________
> Support mailing  list
> Support at win-test.com
>  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
_______________________________________________
Support  mailing  list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101129/5ce1ff96/attachment.htm