[WT-support] SO2R

[Oliver Grossmann]

Hello Hank,
my K3 is actually designed into a station for CQWW CW, i can't check
some features until monday.
I'm also looking for 2nd Bandmap. For an overview this would really help.
If the 2nd VFO is tuned on the same band to a different station, in the
bandmap of active VFO, the station will be highlighted by a gray
background. Maybe it is possible with little work to bring frequency of
2nd VFO all the time to the band map of active VFO if the inactive VFO
is on the same band.
For this the authors maybe need to extend the properties of an bandmap
object in the sourcecode, but i don't kow the source code, so it is just
guessing.

I wrote last week some LUA-Scripts for better SO2V support, but the
scripts are only tested with my TS850. I will work on this next week for
the K3 and will send them over the mailing list. One feature is to set
frequencs of inactive VFO to next spot on band of inactive VFO.

But anyway, VFO should work in anycase from Win-Test with the K3.

Olli, DH2WQ
------------------------------------------------------------------------
  Oliver Grossmann   |   DH2WQ   |   oliver.grossmann at bretzi.de

Am 25.11.2010 00:59, schrieb Harold Aaron:
> To follow-up on the VFO B and SO2V, my FT-2000 works fine - click VFO
> B and receive focus goes to the 2nd receiver and transmit also goes to
> the SUB VFO.  On the K-3 clicking VFO B has no affect, and VFO A
> remains highlighted.
>
> 73, Hank WB4ROA
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101126/0702abeb/attachment.htm