[WT-support] Mixed Mode QSOs

[Stewart GM4AFF]

Bob,
I think it would be a good option to allow the deletion of the 9 in the sent
report at least, without reporting the entry as being incomplete. This only
really applies if sending CW and receiving SSB. Wintest supports thousands
of contests that support cross-mode QSOs - mostly VHF! In my experience
cross mode QSOs are very common in VHF contests.

73
Stewart
GM4AFF
  -----Original Message-----
  From: support-bounces at win-test.com [mailto:support-bounces at win-test.com]On
Behalf Of Bob Wilson, N6TV
  Sent: 11 September 2009 01:35
  To: support at win-test.com
  Subject: Re: [WT-support] Mixed Mode QSOs


  Most contests supported by Win-Test do not permit cross mode contacts.
Even for those that do, I assume cross mode contacts are quite rare.
Therefore, if the requested feature is added to Win-Test, I sure hope it
will only work that way for the limited number of contests that might need
it, rather than work like that for all contests.

  73,
  Bob, N6TV


  On Thu, Sep 10, 2009 at 2:49 PM, Stewart GM4AFF <stewart at gm4aff.net>
wrote:

    When I was logging QSOs during the IARU / RSGB 144MHz last weekend I
noticed
    that if I am using CW (the radio is set to CW), but the station I am
working
    is on SSB, I need to enter a report with only 2 numbers (e.g. 55) but I
have
    to enter 3 numbers (e.g. 559).
    Can I suggest that if one has chosen All Modes during setup one is
allowed
    to enter any report format one wishes when logging, to allow for
cross/mixed
    mode.
    73
    Stewart
    GM4AFF

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090911/70ad2424/attachment.htm