[WT-support] Cabrillo error with WT4

[Tõnno Vähk]

Hi,

 

I was just making cabrillo from my SAC SSB log where I used WT4 for the first time.

 

Something very strange happened.

 

For 3 QSOs out of 770 WT put WRONG BAND into Cabrillo.

 

Those are all 2nd radio QSOs. The band is correct in the log file BUT when I open Edit > Edit Date, Time... and check the frequency then it is wrong.

 

For example - I made zero QSOs on 10 meters but my QSO with 8S0C which is on 20m and also shows 20m in the log (counted correctly in Summary, etc) has frequency 28450 attached to it and thus Cabrillo shows 28450!

 

This is 1st time I used SO2R with one computer and Secondary Radio Window. 

 

It is obvious that there is one very serious bug there - frequency is not taken correctly and even when band is recorded correctly frequency is taken probably at the wrong time or sth.

 

I have 3 QSOs wrong and I cannot quite understand where this wrong frequency comes from. It looks like old frequency. It looks like that maybe the Secondary Radio Window freezes the frequency on the time when you start entering sth to callsign field and does not actually take the frequency at the time when Enter is pressed, can this be it???

 

I can send the log file if you wish. It is also strange that when frequency is 28450 then log shows 20m!

 

73

Tonno

Es5tv

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20091016/499e1142/attachment.htm