[WT-support] Packetspot-Problem

[Olaf Brunner]

Hello,

many thanks for the quick replay.
Ich have on the same PC a active LAN and a active WLAN connection.
After switch off the WLAN I get only one DXcluster info on my monitor.

73 de olaf dl7cx

  -----Ursprüngliche Nachricht-----
  Von: support-bounces at win-test.com [mailto:support-bounces at win-test.com]Im
Auftrag von Bob Wilson, N6TV
  Gesendet: Sonntag, 1. November 2009 19:43
  An: support at win-test.com
  Betreff: Re: [WT-support] Packetspot-Problem


  What version of Win-Test?


  What version of wtDxTelnet?


  It sounds like you have TWO PCs on a network, and BOTH are running
wtDxTelnet.  If you have two or more PCs networked together, only ONE PC
should run be running wtDxTelnet.


  If Win-Test and wtDxTelnet are properly configured, all PCs will see the
spots OK even though only ONE is running wtDxTelnet.


  73,
  Bob, N6TV


  On Sun, Nov 1, 2009 at 9:34 AM, Olaf Brunner <olaf.brunner at dzn.de> wrote:

    Hello,

    I have in the dx-cluster monitor every time the info twice but not in
the
    wtDX telnet.
    If I wrote sh/dx/10 so I got 20 info of course only 10 spots but these
    twice.
    My own commands I see also twice.
    What can I do or what is wrong with my setup?
    73 de Olaf dl7cx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20091102/64d3b8a1/attachment.htm