[WT-support] TX EQ setting (aka Win-Test support)

[Nick Lekic]

Thank you Peter

I was actually interested in possibility of running KDVR3 Contest Voice messages from Win-Test F(*) keys which appears to be possible from N1MM. 

Perhaps this would be a better question for Win-Test authors given the ever growing popularity of the K3. 

73,  Nick
ve3ey 



 

Sorry, that should be mn009; for TX EQ - mn008; is of course RX EQ.

Can't see a way of doing it in Win-Test, Nick. One of the reasons why I 
abandoned my (paid for) Win-Test in favour of N1MM.

Peter Connors wrote:
> I have identified an easy way to switch between various TX EQ settings 
> using N1MM or Logger32 thanks to information kindly supplied by Bill 
> Coleman N2BC, author of K3_EZ.
> 
> The method involves using the macro functions in each program to set 
> compression and TX EQ bands. For example, flat with no compression in 
> Logger32 would be
> $command cp000;mn008;swt53;mn255;$
> which zeroes compression, clears the existing EQ and tidily terminates.
> 
> For my DX/Contest setting I use (the space after 'command' may appear as 
> a line feed):
> $command 
> cp025;mn008;swt53;swt11;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;swt12;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;dn;swt13;dn;dn;dn;dn;dn;dn;dn;dn;dn;swt24;dn;dn;dn;dn;mn255;$
> which sets CMP to 25, clears the existing EQ and then sets it to -16, 
> -16, -9, -4 in the first four bands and then exits gracefully.
> 
> The N1MM macros need starting with {CAT1ASC instead of $command, then 
> terminating with } instead of $.
> Other EQ settings can be easily set by examining the K3 Programmers 
> Reference; a macro that needs very many commands may exceed the maximum 
> length which is 255 in N1MM, unknown for Logger32.
> Although the Programmers Reference suggests that successive SWTxxx 
> commands may need 100msec delay to 'set', these macros work with the COM 
> port at 38400 without any apparent need for command pacing.
> 
> 73, Pete Connors F5VNB/G4PLZ
> PS I have just read Wayne's mail about keeping EQ settings within ±6dB 
> so I am about to change the macros after writing this. Perhaps Wayne 
> will reduce the limits in future firmware?
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html