[WT-support] [SPAM detected by FortiClient] Re: ic781 configuration

[Felipe J Hernandez]

Got it working, for some reason, the com ports have to be cleared by rebooting the machine.

Regards,

Felipe
HNY Np4z!
  ----- Original Message ----- 
  From: Dave Zeph 
  To: support at win-test.com 
  Sent: Thursday, January 01, 2009 7:11 PM
  Subject: [SPAM detected by FortiClient] Re: [WT-support] ic781 configuration


  Fllipe .. 

   

  DTR      - Handshake

  RTS      - Handshake

  Date     - 8

  Parity    - N

  Stop     - 1

  Use Ci-V Transceive                  - CHECKED

  Don't Poll                                 - UNCHECKED

   

  On IC-781

  Address                                    26H

  Baud Rate                                 9600 (781 runs well at 9600 Baud)

  Transceive Function                   ON

   

   

  73 ---> Dave, W9ZRX



   


------------------------------------------------------------------------------

  From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On Behalf Of Felipe J Hernandez
  Sent: Thursday, 01 January, 2009 5:58 PM
  To: support at win-test.com
  Subject: [WT-support] ic781 configuration

   

  Hi,

   

  Im trying to get my 781 to work with the software.

   

  The conf I have on n1mm is as follows

  1200

  n

  8

  2

  Dtr always on

  rts always on

  Icom code hex 26

   

   

  THe config I have on Wintest is:

   

  1200

  8

  none

  1

  Dtr on

  rts on

   

  I have tried the default switch on config,dtr off,on rts on,off, changed to 4800, 9600 stop bits 1,2

  ci-v transceive on-off, poll dont poll.. anything I can imagine.

   

  I go back to n1mm and works fine so the radio is ok. Im using version 3.23.0

   

  Any Ideas,

   

  Many thanks and happy new year!

   

   

  Felipe 

  NP4Z



------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090102/a4630b2a/attachment-0001.htm