[WT-support] CW Skimmer
Daniel Fourlas
sv1jcz at yahoo.de
Wed Dec 2 18:16:23 CET 2009
I have the same problem with Win!
73 de Daniel
SV1JCZ / DL1JCZ, SX1L
----- Ursprüngliche Mail ----
> Von: Winfried Kriegl DK9IP/KH7CD <dk9ip at dk9ip.de>
> An: support at win-test.com
> Gesendet: Mittwoch, den 2. Dezember 2009, 10:37:42 Uhr
> Betreff: Re: [WT-support] CW Skimmer
>
> Hi Patrick,
>
> when you have several instances of wtDXtelnet running with different
> DXclusters/Skimmers,
> commands from the DXcluster window (ALT-T) in Win-Test are broadcasted to all
> the
> wtDXtelnet instances and all connected DXclusters/Skimmers. I do also get the
> "command
> error" from the DXcluster when sending a skimmer command but that does not cause
> a
> disconnect from the cluster. If your cluster node disconnects on a command error
> try
> another node. It works for me with DB0ERF-5. There is no such problem if you use
> the input
> line of the appropriate wtDXtelnet window (command is not broadcasted to other
> wtDXtelnet
> instances).
>
>
> What bothers me when running several wtDXtelnet instances is that the
> configuration in
> "DXcluster properties" is always applied to all the runnning wtDXtelnet windows.
> So if a
> reconnect occurs on any wtDXtelnet window it may go to the "wrong"
> cluster/skimmer. You
> have to manually reconfigure settings in "DXcluster properties" in every window.
> Would be
> great if the configuration would apply to the selected wtDXtelnet window only.
>
> 73 de Win DK9IP
>
>
>
>
>
>
>
> Patrick 9A5CW schrieb:
> > Hi Bob,
> > my fault ;)
> > I am using wtDxTelnet last version.
> > I know that i can run many wtDxTelnet on a single computer, tried that
> > already b4.
> > The same msg happens also here: SKIMMER/QSY command error .
> > It looks like CWSkimmer telnet wants to send data to normal dxcluster,
> > thats not allowed so
> > dxcluster disconnects and try connect again in 30seconds.
> >
> > 2nd question ;)
> > Any chance to share same com port used for CAT in WT and Skimmer? (with
> > some virtual port?)
> > Our FT1000MP have built SDR inside (mod) on 2nd VFO and i like to have
> > exact freq. display.
> >
> > 73
> >
> >
> >
> > On Tue, Dec 1, 2009 at 6:53 PM, Bob Wilson, N6TV
> > > wrote:
> >
> > Patrick,
> >
> > SV1JCZ is using wtDxTelnet, not Wintelnet, so it sounds like you
> > have a different issue.
> >
> > I am not familiar with WintelnetX. Win-Test is designed to work
> > with wtDxTelnet, a different program. You can connect to both DX
> > clusters and local CW Skimmers by running more than one copy of
> > wtDxTelnet, on the same computer or on different computers. Each
> > copy needs to be configured to use the same broadcast address and
> > port number, but connect each to a different cluster or to a local
> > CW Skimmer.
> >
> > See the FAQ
> >
> .
> >
> > 73,
> > Bob, N6TV
> >
> > On Tue, Dec 1, 2009 at 3:30 AM, Pete Smith
> > > wrote:
> >
> > I think part of it may be a problem with the "Routes" setup in
> > WintelnetX. You need to un-check the "2-way" check box to give
> > yourself full control over which devices talk to each other, and
> > in what direction. I can't comment on the Win-Test aspects of
> > this, though.
> >
> > 73, Pete N4ZR
> > New Articles Daily - the Contesting Compendium at
> http://wiki.contesting.com
> > The World Contest Station Database, updated daily at
> www.conteststations.com
> > The Reverse Beacon Network at http://reversebeacon.net
>
> >
> >
> > On 12/1/2009 4:02 AM, Patrick 9A5CW wrote:
> >> Hi,
> >> same problem at 9A1P with CWskimmer and wintelnet,
> >> config:
> >> 1st. PC - CWskimmer
> >> 2nd. PC - wintelnet connected to some dxcluster + WT logging
> >> 3rd. PC - 2nd wintelnet connected to CWskimmer telnet + WT
> >> logging
> >>
> >> CWskimmer telnet tried to send spots to the internet
> >> dxcluster, normal DXcluster didnt
> >> allowed that, if are both on the same broadcast port. After
> >> changing port for CWskimmer no more problems but no more spots
> >> in WT band map window.
> >>
> >> Anyone tried something similar?
> >>
> >> Best 73, Patrik 9A5CW
> >>
> >> On Tue, Dec 1, 2009 at 8:57 AM, Bob Wilson, N6TV
> >> > wrote:
> >>
> >> On Sat, Nov 28, 2009 at 3:59 PM, Daniel Fourlas
> >> > wrote:
> >>
> >> Good morning Gentleman,
> >>
> >> i have some problems with CW Skimmer and Wintest.
> >>
> >> I make all who writes in the Manual...but i become
> >> this answer from the DX
> >> cluster:
> >>
> >> SKIMMER/QSY command error
> >>
> >> and this answer:
> >>
> >> Trying to connect to localhost
> >> Disconnected
> >> wtDxTelnet will try to connect again in 30 seconds ...
> >>
> >> Have anyone a better Manual to Install Wintest and CW
> >> Skimmer?
> >>
> >> 73 de Daniel
> >> SV1JCZ / DL1JCZ
> >>
> >>
> >> See Connecting the Perseus SDR to CW Skimmer
> >> slide 14.
> >>
> >> 73,
> >> Bob, N6TV
> >>
> >> _______________________________________________
> >> Support mailing list
> >> Support at win-test.com
> >> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >>
> >>
> >>
> >>
> >> --
> >> 9A5CW - Patrik Hrvatin
> >> --... ...--
> >>
> ------------------------------------------------------------------------
> >> _______________________________________________ Support
> >> mailing list Support at win-test.com
> >>
> >> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >
> >
> >
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >
> >
> >
> >
> > --
> > 9A5CW - Patrik Hrvatin
> > --... ...--
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
__________________________________________________
Do You Yahoo!?
Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz gegen Massenmails.
http://mail.yahoo.com
More information about the Support
mailing list