[WT-support] R: MK2 & Delay

[IZ7AUH Frank]

GM I try to set on Wintest a 115200 but I have a same delay, slow
 I close
all application, Weather Statio and other software, but no change!

A very strange problem


Where is a problem on Wintest or MK2

 

Sincerely and 73,

FIRMA-FRANK1

Francesco Giacoia, IZ7AUH/WZ7AUH

ARI Member - ARRL Member

E-mail:  <mailto:hello at iz7auh.com> hello at iz7auh.com -
<mailto:wz7auh at arrl.net> wz7auh at arrl.net

Web:    <http://www.iz7auh.com/> http://www.iz7auh.com

Phone: +39.349.47.06.795

 

Questo messaggio è strettamente personale, pertanto chi dovesse inoltrare a
terze persone lo stesso viola il diritto di privacy epresso dallo scrivente,
non inviare a nessuno questo messaggio, qualora questo messaggio non fosse
diretto alla tua persona, ti prego di comunicare qualsiasi abbuso.

 

Da: support-bounces at win-test.com [mailto:support-bounces at win-test.com] Per
conto di Bob Wilson, N6TV
Inviato: martedì 28 ottobre 2008 19.38
A: support at win-test.com; Matthias.Jelen at gmx.de
Oggetto: Re: [WT-support] MK2 & Delay

 

Oh!  No wonder the microHAM control protocol always seemed to be so slow.
Thanks for mentioning this.

Maybe Win-test should enable the "Default settings" button for the microHAM
MK2R/MK2R+ and MK/MKII and have it set the baud rate to 57600,N,8,2 at
minimum when you press it?

73,
Bob, N6TV

On Tue, Oct 28, 2008 at 9:49 AM, Matthias Jelen <Matthias.Jelen at gmx.de>
wrote:

Hi Frank,

I had the same problem. As far as I remeber, the delay vanished after I
increased the speed of the control port of my MK2R+ from 1200 baud to
115000 baud in the Wintest configure interfaces window.

Hope this works for you too.

Good luck,

Matthias, DK4YJ

> *Hi Guys,*

>
> *I set my MK2 with Wintest, but I have a strong delay from push F1
> button for example to send DVK or RTTY MSG or CW MSG why?*
>
> *Where is a delay setup for reduce this delay?*
>
> * *
>
> *Many tnx to all!*
>
> * *
>
> * *
>
> Sincerely and 73,
>

> FIRMA-FRANK1
>
> *Francesco Giacoia, IZ7AUH/WZ7AUH*
>
> ARI Member - ARRL Member
>
> E-mail: /hello at iz7auh.com <mailto:hello at iz7auh.com> - wz7auh at arrl.net
> <mailto:wz7auh at arrl.net>/
>
> Web:   /http://www.iz7auh.com <http://www.iz7auh.com/>///

>
> Phone: /+39.349.47.06.795/
>
>
>
> */Questo messaggio è strettamente personale, pertanto chi dovesse
> inoltrare a terze persone lo stesso viola il diritto di privacy
> epresso dallo scrivente, non inviare a nessuno questo messaggio,
> qualora questo messaggio non fosse diretto alla tua persona, ti prego

> di comunicare qualsiasi abbuso./*
>
>
>
>------------------------------------------------------------------------

>
>_______________________________________________
>Support mailing list
>Support at win-test.com
>http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>

_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20081029/cf5f2e72/attachment-0001.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1250 bytes
Desc: not available
Url : http://www.f5mzn.org/pipermail/support/attachments/20081029/cf5f2e72/attachment-0001.jpeg