[WT-support] FT1000D working

Laurent HAAS - F6FVY f6fvy at free.fr
Tue Oct 7 19:55:39 CEST 2008


Hi Bob

Bob Wilson, N6TV a écrit :

> So are all the FT-1000D users on this list in agreement that if you're 
> using an FT-1000D with Win-Test you /must/ set both RTS and DTR to 
> Handshake?  Or is this only true when using 3rd party devices like the 
> K1NU CAT control cable 
> <http://k1nu.home.comcast.net/%7Ek1nu/k1nu/Products/control.html>, and 
> /not /required when using the original Yaesu FIF-232C 
> <http://www.universal-radio.com/catalog/commrxvr/0322.html> and CT-62 
> interface cable?  I'd like to get this properly documented in the Wiki 
> in the Supported rigs section 
> <http://docs.win-test.com/wiki/Supported_rigs>.

IMHO, it's CLEAR that DTR and RTS settings are totally dependent on the 
CAT level-interface, as the FT 1000D CAT output doesn't manage any 
hardware handshake (no such output pins on this transceiver) ! It is 
even obvious if the level interface has no external power supply.

73

Larry - F6FVY


More information about the Support mailing list