[WT-support] [Fwd: [Elecraft] DVR from software]

[Peter]

Hi

Now the DVR are going out for the K3 I have a software request:
The K3 internal voice keyer can be programmed with the RS232 commands.
Is it possible to add those commands to Win-test?
http://www.elecraft.com/manual/K3_Pgmrs_Ref_Rev_B16.pdf

This will skip the voicekeyer via the soundcard

Peter
PC2A

-------- Originele bericht --------
Onderwerp: 	[Elecraft] DVR from software
Datum: 	Wed, 10 Dec 2008 20:09:08 +0000
Van: 	W8ZN at comcast.net
Aan: 	elecraft at mailman.qth.net



In response to the person that just posted about DVR functions from a computer program - 

>From page 14 of the K3 programmers reference manual.

SWT/SWH * (Switch Emulation; SET only) K3 Extended SET format (K31): SWTnn; (TAP functions) or SWHnn; (HOLD functions). nn is determined from Table 4. Table 4 says nn of 21 will do the same as taping M1 on the front panel so I believe this should work.

If you logging program doesn't support this command, you can assign a funtion key to a macro from the OS to generate this command and pass it to the K3.

Terry