[WT-support] RTTY/MMTTY problem
Bob Wilson, N6TV
n6tv at arrl.net
Mon Apr 28 00:20:04 CEST 2008
In the Win-Test Enable MMTTY
window<http://docs.win-test.com/wiki/RTTY#Enable_MMTTY>,
did you select a different directory path to MMTTY.EXE than the one being
used with DX4Win?
If so, perhaps the MMTTY configuration parameters don't match.
73,
Bob, N6TV
2008/4/26 Andy Hewitt <andyphewitt at btopenworld.com>:
> Kenth,
>
> I am using a TS950SDX. The strange thing is that the MMTTY engine works
> well with DX4Win and as the full install, but this problem occurs with
> Win-Test.
>
> 73
>
> Andy G3SVD
>
>
>
>
> ------------------------------
>
> *From:* support-bounces at win-test.com [mailto:support-bounces at win-test.com]
> *On Behalf Of *Kenth Johansson
> *Sent:* 26 April 2008 12:09
> *To:* support at win-test.com
> *Subject:* Re: [WT-support] RTTY/MMTTY problem
>
>
>
> Andy,
>
> Which type of radio do you use? With Yaesu FT1000mkV, as I have, you must
> change to reverse tone pair in the radio RTTY menu. I don´t know why but it
> works for me.
>
>
>
> Kenth
>
> sm6dyk
>
> ----- Original Message -----
>
> *From:* Andy Hewitt <andyphewitt at btopenworld.com>
>
> *To:* WIN TEST <support at win-test.com>
>
> *Sent:* Saturday, April 26, 2008 12:46 PM
>
> *Subject:* [WT-support] RTTY/MMTTY problem
>
>
>
> Hi,
>
> I have asked about this on the MMTTY reflector and had one response
> "sounds familiar". I have been having difficulty with using Win-Test in the
> HFCC RTTY contests using AFSK. Operating on Thursday I was receiving well
> with good copy but when I called a local station he did not copy me. It
> seems that there is a difference between the tone frequencies on TX and RX
> so I am off frequency enough for at least one tone to be outside the other
> stations filter. On Thursday I reverted to using MixW and that worked FB
> during the contest. Yesterday I did some tests by using the MMTTY engine in
> DX4Win and that seemed to be OK and also using MMTTY as a full install and
> that also worked FB. Testing with a different local stn yesterday we
> measured the difference to be up to 130Hz. In the MMTTY control panel there
> is a TX offset control which is set to zero. Also I had set up for the
> standard "HAM" frequencies and neither the AFC nor NET buttons were on. I
> was wondering if any OTHER USERS have experienced this little difficulty?
> Having paid for Win-Test I would like to use it for all contest logging. I
> will still use MixW as my datamodes prog for normal operation.
>
> 73
>
> Andy G3SVD
>
>
> ------------------------------
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
> ------------------------------
>
> Jag använder en gratisversion av SPAMfighter för privata användare.
> 7376 spam har blivit blockerade hittills.
> Betalande användare har inte detta meddelande i sin e-post.
> Hämta gratis SPAMfighter <http://www.spamfighter.com/lsv> idag!
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20080427/385be5c2/attachment.htm
More information about the Support
mailing list