[WT-support] V.3.16 VHF/UHF app. Mode-Code to REG1TEST

[Chris Libowitzky, oe3li]

Dear Olivier,
in the General Rules for "Alpe Adria VHF Contest"
(i.e. see English version http://slovhf.net/download/AA_RULES.pdf from
Slovenia) you may find:

DATE AND TIME:
Sunday in the first full weekend in August from 07.00 – 15.00 UTC
BAND AND MODES:
Band: 2 m /144.000 – 144.400 MHz
Modes: CW (A1), SSB (J3E)
(same for UHF/SHF: Sunday, third full weekend in June)
......
All logs must be in EDI format and must be send 15 days from contest date.
National contest managers are obligated to send all received logs to the
organizer.
.....

For IARU-Reg.1 VHF and UHF/Microwave Contest
see "VHF-Handbook V.5.21. i.e.
http://www.oevsv.at/export/oevsv/download/UKW/VHF_Handbook_V5_21.pdf
(Ch. 4.6. and 4.7. )

4.6.5 Contacts
Each station may only be worked once, whether it is fixed, portable or
mobile. If a station is worked again
during the same contest, only one contact may count for points, but any
duplicate contacts shall be logged
without claim for points and clearly marked as duplicates. Contacts made via
active repeaters do not count
for points.
4.6.6 Type of emission
Contacts may be made in A1A J3E or F3E(G3E).
4.6.7 Contest exchanges
Code numbers exchanged during each contact shall consist of the RS or RST
report, followed by a serial
number commencing with 001 for the first contact and increasing by one for
each successive contact. This
exchange must immediately be followed by the complete Locator of the sending
station (examples : 59003
JO20DB or 579123 IN55CC).
Note: for the “T” part of the report, see chapter 7.9.9
(log format Ch. 4.11 REG1TEST applies)
.....
As Win-Test is managing the MODE-SWITCHING with "All Mode"-operation very
well in QSO-Edit,
it would be a benefit, if it also does in REG1TEST (.EDI-File Export).

Chapter 7.9.9 sure may be an item for Win-Test future versions!
At the moment V 3.16. shows "Field Error" if you try to edit T of RST in
alphanumerics.
I will bring it to your attention separate mail.

tks in adv for yout kind attention, 73, Chris, oe3li
(sri for delay, cc OE3FKS, OVSV-VHF-Contests)


----- Original Message ----- 
From: "Olivier F5MZN" <olecam at f5mzn.org>
To: <support at win-test.com>
Sent: Sunday, September 23, 2007 5:36 AM
Subject: Re: [WT-support] V.3.16 VHF/UHF app. Mode-Code to REG1TEST


> Hello Chris,
>
> Chris Libowitzky, oe3li wrotte:
> > Hello friends,
> > mni tks for using the km(Points)- rounding scheme acc. IARU-Reg.1 Rules
> > for VHF/UHF/SHF
> > in your Version 3.16.0.
> >
> > Your program would be perfect, if you could also use "Mode Code" in
> > REG1TEST (.EDI) Export-Format,
> > since your MODE-SWITCHING in QSO-Edit does already very well -"All
> > mode"-opn provided - !
> >
> > Mode code
> >   The mode code is used to show which modes were used for the
> >   QSO. Below is a list of the code with corresponding modes.
> >
> >   Mode code  TX mode     RX mode
> >   0          non of below
> >              non of below
> >   1          SSB         SSB
> >   2          CW          CW
> >   3          SSB         CW
> >   4          CW          SSB
> >   5          AM          AM
> >   6          FM          FM
> >   7          RTTY        RTTY
> >   8          SSTV        SSTV
> >   9          ATV         ATV
> >
> >   If the mode is not important it can be left blank, i.e. not
> >   stated in rules/invitation.
> > IN MOST VHF-RULES, THAT I KNOW, MODE IS REQUESTED for LOG-SUBMISSION.
>
> Sorry but I never see any EU-rule rules which the mode is mandatory for
> the log submission for. Please tell me which one you have in mind.
>
> 73,
> -- 
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support