[WT-support] WAE observation

Winter, Andreas andreas.winter at siemens.com
Tue Nov 13 12:36:06 CET 2007


Hi,

We experienced something similar. I don't know, if it is related to the dx-spots. The transmission of the characters was delayed / stoped (PTT on).
After reboot of the pc everything worked fine again. Therefore we assumed a buffer leakage.

73

Andy, DK4WA


-----Ursprüngliche Nachricht-----
Von: support-bounces at win-test.com [mailto:support-bounces at win-test.com] Im Auftrag von z35x at mt.net.mk
Gesendet: Dienstag, 13. November 2007 09:38
An: support at win-test.com
Betreff: [WT-support] WAE observation

   Hi WT folks,


  This past weekend we was running WAE RTTY with  Z360M callsign from our location (Z37M)

  We was using WT 3.18 and everything work well until 1100 QSO`s on sunday morning, when the 
network on three computers go slowdown, which means, when we transmit and the spot is coming, the 
RTTY transmitted signal stop for a while. The config was: ADSL connection on P-IV laptop from where 
we took cluster to other two computers not connected to the Internet, with separate static IP 
addresses on LAN.  When we disconnect the network on one of the running computer, everything go 
well.  Is there any other similar problem with WT users?
 Also, as Ben mentioned, the NP3D/W1 was identified as a K3 multiplier by Win-Test. In fact it 
should be a K1.

 73 to all and CU in CQ WW CW with guests from DL...

 Chris, Z35X (ex.Z31GX) for the Z37M team


__________

MaxADSL 2 so 2 GB soobrakjaj za 499 den. mesechno (589 den. so DDV).
www.adsl.com.mk
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support


More information about the Support mailing list