[WT-support] WT 3.10.0

Dave Zeph zephd at indy.rr.com
Thu Mar 22 23:06:13 CET 2007 

I want to apologize for these remarks.  Once again I used REPLY instead of
FORWARD.

It was not my intent to be insulting.  I was just joking about cultural
differences in approaches to a problem.


After looking at the display a while longer, I decided that the problem is
that if LEFT-ALIGNED is chosen for the HEADER, then I would expect the Data
Under the Header to also be LEFT-ALIGNED.


Example:


Win-Test		Everything Left-Aligned

MODE			MODE			

 SSB			SSB
  CW			CW
RTTY			RTTY


I've been compiling a VHF.DTB file for use in the June VHF Contest, and I
note that many of the logs I've received have has all of the information
LEFT-ALIGNED.  The logs were produced using a variety of logging program.



73 ---> Dave, W9ZRX




> -----Original Message-----
> From: support-bounces at win-test.com [mailto:support-bounces at win-test.com]
> On Behalf Of Dave Zeph
> Sent: Thursday, 22 March, 2007 17:47
> To: support at win-test.com
> Subject: RE: [WT-support] WT 3.10.0
> 
> You need to read the parts about SEGMENTS, and MARKERS carefully.
> 
> Also decide whether you want to display the QSO NUMBER or not.
> 
> One thing that came to mind when I looked at the Display with QSO NUMBER
> turned off is that the two choices on COLUMN ALIGNMENTS are:
> 
> 1) Centered
> 2) Left Aligned
> 
> Take a look at the display and tell me if what's missing is a RIGHT
> ALIGNMENT option???  I would use RIGHT ALIGNED if it were available.
> 
> Another case of FROG brain and GERMAN/IRISH brains working out-of-phase!!!
> But seriously, tell me what you think.
> 
> 
> 
> 
> ---- Dave
> 
> 
> 
> > -----Original Message-----
> > From: support-bounces at win-test.com [mailto:support-bounces at win-test.com]
> > On Behalf Of Olivier F5MZN
> > Sent: Thursday, 22 March, 2007 17:23
> > To: WT
> > Subject: [WT-support] WT 3.10.0
> >
> > Dear fellow WT users,
> >
> > WT 3.10.0 is out:
> > http://download.win-test.com/wt-3.10.0.exe [full, 4MB]
> > http://download.win-test.com/wt-3.10.0-update.exe [update only, 2.3 MB]
> >
> > This version comes with a feature needed by some requests regarding the
> > WPX. The serial number is now separated by half a space char to the
> > report. It is also possible to hide the total QSO number. That is just
> > the emergency improvements done before the WPX SSB. Please read the
> > following release information to lurn more about this version.
> >
> > Good luck in the coming WPX!
> >
> > Release 3.10.0 (Mar 22, 2007)
> > -----------------------------
> >
> > - Bugfix: $TR1 and $TR2 macros were not working using the microHam
> >    MK2R interface. Fixed. Tks OH2UA.
> >
> > - New tool : Time shifting, in the Tools menu.
> >
> >    You can time shift selected Qsos by any amount of time amount in both
> >    directions. You can apply the time shift for the entire log, for the
> >    Qso entered by your own station, for Qso entered by several stns,
> >    or a range of Qsos.
> >
> >    Even if this tool is more supposed to be used after a contest,
> >    to correct a wrong clock setting, each time corrections is
> >    broadcasted to the other stns of the network by default. You can
> >    disable this broadcasting to save time, if not needed.
> >
> >    Note that time shifting is pretty CPU intensive and it may take
> >    a certain amount of time for large logs, because each Qso
> >    modification requires internal structures (mainly statistics) to be
> >    updated.
> >
> >    Note : Hesitating and wise users are encouraged to perform a backup
> >    of their log before proceeding. Time shifting can't be cancelled
> >    while it is in progress, to avoid any log inconsistancy..
> >
> > - Main log window : New option in Options / Log menu to hide the QSO
> >    number column. Tnx RW3AH, SM3WMV.
> >
> > - Main log and secondary radio windows : To ease reading, the received
> >    RS(T) and the received exchange are now separated by an half space
> >    wide blank area.
> >
> >    Note that it is still *one unique* field. It is only a display trick.
> >
> > - New feature : Band segments for bandmaps
> >
> >    You can now display segments in the bandmap tab of the radio
> >    windows. Segments are defined by textual files with a .seg extension
> >    located in the Win-Test directory. You can use and display up
> >    to 10 files simultaneously, by selecting them in the Options /
> >    Data files / Segments files... menu.
> >
> >    Note that, because of the available area constraints, you can't have
> >    more than 5 segments displayed per band for a given frequency.
> >
> >    You can display or not the loaded segments by using the contextual
> >    menu item Display Options / Segments / Display. This setting can be
> >    different for each radio.
> >
> >    The syntax of the segments files is very basic, and are very easy
> >    to create with a simple text editor like notepad.
> >
> >    A segment is defined by its miniumum frequency (in kHz), its maximum
> >    frequency (in kHz) and an optional tooltip (30 chars max.). The two
> >    frequencies can be linked by an hyphen.
> >
> >    Example :
> >
> >    14150-14350 Extra licences SSB
> >
> >    A directive is also allowed :
> >
> >    # COLOR color => Set the color of the following segments of the file
> >
> >    The allowed colors are :
> >
> >    White, Black, Red, Green, Blue, Yellow, Magenta, Cyan.
> >
> >    The case of the color is irrelevant. If no color is specified, the
> >    segments will be yellow.
> >
> >    Example :
> >
> >    # COLOR blue
> >    #
> >    14150-14350 Extra licences SSB
> >
> >    will display this segment in blue on the bandmap. Its associated
> >    tooltip will be "Extra licences SSB".
> >
> >    The segments order, and potential overlaps in the file are
> irrelevant.
> >    WT will take care to display them in an optimized way.
> >
> >    Two sample files are located in our repository :
> >
> >    http://download.win-test.com/files/segments/
> >
> >    UsSegmentsDetailled.seg displays all band segments for every US
> >    licence type.
> >
> >    UsSegments.seg displays all band segments in which all US licencees
> >    are potentially active.
> >
> >    You can make your own band segments files for other countries,
> >    regions, etc. and share them with the WT community if you want.
> >
> >    Tnx DL1MGB for inspiration.
> >
> > - New feature : Markers for bandmaps.
> >
> >    You can now display markers in the bandmap tab of the radio
> >    windows. Markers are defined by textual files with a .mkr extension
> >    located in the Win-Test directory. You can use and display up
> >    to 10 files simultaneously, by selecting them in the Options /
> >    Data files / Markers files... menu.
> >
> >    You can display or not the loaded markers by using the contextual
> >    menu item Display Options / Markers / Display. This setting can be
> >    different for each radio.
> >
> >    The syntax of the markers files is very basic, and are very easy
> >    to create with a simple text editor like notepad.
> >
> >    A marker is defined by its frequency (in kHz), its label (one word)
> >    and an optional tooltip (30 chars max.).
> >
> >    Example :
> >
> >    14100 Bcn NCDXC Beacon
> >
> >    Two directives are also allowed :
> >
> >    # BACKGROUND color => Sets the bg color of the following markers of
> >    the file. If no color is specified, the default color is green.
> >    # TEXT color => Sets the text color of the following markers of the
> >    file. If no color is specified, the default color is.black
> >
> >    The allowed colors are :
> >
> >    White, Black, Red, Green, Blue, Yellow, Magenta, Cyan.
> >
> >    The case of the color is irrelevant.
> >
> >    Example :
> >
> >    # BACKGROUND white
> >    # TEXT green
> >    #
> >    14100 Bcn NCDXF Beacon
> >
> >    will display a white marker with "Bcn" green text. The associated
> >    tooltip will be "NCDXF Beacon".
> >
> >    As usual, you can double-click on a marker to set the current
> >    radio on the freq. of the marker.
> >
> >    A sample file is located in our repository :
> >
> >    http://download.win-test.com/files/markers/
> >
> >    called NcdxfBeacons.mkr. It displays markers for each NCDXF beacon.
> >
> >    You can build your own markers files (VHF beacons etc.) and share it
> >    with the WT community if you want.
> >
> >    Tnx DL1MGB for inspiration.
> >
> > - WPX contest : Mult wnd (Alt-M). Band selection menu item removed.
> >    It also applies for the RDAC contest. Tnx I4UFH.
> >
> > 73,
> > --
> > olivier / f5mzn
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> 
> 
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support

More information about the Support mailing list