[WT-support] Fw: SWAP (Ctrl-S) command for SO2R

SM6CNN sm6cnn at telia.com
Wed Jun 6 12:47:07 CEST 2007


I have not seen any response to my message so I try again.
I have used Portmon to check the commands sent to the Orion so I can provide 
more details.
73
Andy SM6CNN

----- Original Message ----- 
From: "SM6CNN" <sm6cnn at telia.com>
To: <support at win-test.com>
Sent: Thursday, May 31, 2007 10:29 AM
Subject: [WT-support] SWAP (Ctrl-S) command for SO2R


>I used Win-Test in combination with the microKEYER 2R+ in an SO2R setup in
> the WPX contest. This was a great combination!
>
> Only problem was that the SWAP (ctrl-s) command did not work as expected. 
> My
> primary radio is an Orion and the secondary is an FT-1000MP. The Orion was
> changing both VFOA and VFOB and almost always ended up with the wrong
> frequency in VFOA. Often VFOA in the MP got the frequency of VFOB in the
> Orion. All I want is to swap the frequencies in VFOA in the Orion and the
> VFOA in the MP. I will be happy to provide further details of what is
> happening if someone can look into this.
> Thanks for a super program!
> 73
> Andy SM6CNN
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.472 / Virus Database: 269.8.4/825 - Release Date: 2007-05-30 
> 15:03
>
> 



More information about the Support mailing list