[WT-support] MMTTY

[Kenth Johansson]

Tom,
In the Device Router for MK use >Options > Load Template: mk_win-test.tpl and you have the default setting for setting up MK together with WT. Then you have to change ports and so on if you don´t use the same as in the template.

Kenth sm6dyk


----- Original Message ----- 
From: "Tom Wylie" <t.wylie at ntlworld.com>
To: <support at win-test.com>
Sent: Friday, February 09, 2007 10:38 PM
Subject: [WT-support] MMTTY


> I must be getting old.  I have changed my machine etc.
> 
> I am using a microkeyer.
> 
> When using Win-test RTTY with MMTTY, what do I set up my Congiguration for?
> I use COM3 with my rig control - works fb.
> Normally COM 5 would be my FSK......
> There is no segtting in configuration for a Microkeyer?
> Do I leave COM 5 blank (unticked) and set the COM port to NONE in MMTTY?
> 
> My brain needs a memory upgrade   hihi
> 
> Tom
> GM4FDM
> 
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> 

--------------------------------------------------------------------------------
Jag använder en gratisversion av SPAMfighter för privata användare.
980 spam har blivit blockerade hittills.
Betalande användare har inte detta meddelande i sin e-post.
Hämta gratis SPAMfighter idag!