[WT-support] CW Split issue with IC781 and IC7800 - B VFO MODE problem

[Tim Duffy K3LR]

We (W9ZRX and I) tried the newest version getting ready for the ARRL DX contest
this morning.

We tried the same test as issue reported during CQWW CW operation from the IC781
and IC7800 (verified problem issue with both radios) at K3LR:

If you have BOTH IC781 (or 7800) VFOs (A and B) in the CW mode and you hit the
Minus (-) key to enter a split frequency (to set the B VFO frequency), the radio
goes into SPLIT mode OK, sets the B VFO OK, but sets the MODE to LSB (it should
stay or be set to CW). The A VFO stays in CW no problem. The B VFO needs to be
told to stay in CW.

This problem does not happen on Phone. The proper LSB or USB is set all OK in
the B VFO. No problem at all.

I will be available to test any dev version (if possible) until Friday night
eastern USA time if you can see a easy fix?

Thanks and 73,
Tim K3LR