[WT-support] Problem with DX cluster

[Dave Sharred]

Thanks very much; Bob gets the prize !

I never found this in the handbook; the screen shots showed the address I
quoted.....

73

Dave
G3NKC
  -----Original Message-----
  From: support-bounces at win-test.com [mailto:support-bounces at win-test.com]On
Behalf Of Bob Wilson, N6TV
  Sent: 30 August 2007 21:33
  To: support at win-test.com
  Subject: Re: [WT-support] Problem with DX cluster


  On 8/30/07, Dave Sharred <g3nkc at md4k.com> wrote:
    I opened WtDxTelnet; and connected ok to F5MZN. IN this window, I see
under
    Options  ip adr 192.168.0.255; Port 9871 App id TELNET; and the disable
box
    is not checked

  For a single computer running both WtDXTelnet and Win-Test , use the
loopback broadcast IP address, 127.255.255.255, as documented here:

  http://docs.win-test.com/wiki/DX_Cluster/Telnet



    The telnet window works fine, but I cannot communicate from WT ALT T
Window,
    nor see anything in the DXCluster window

  I don't think it works if you select Single-Op.  You must be select
Single-Op Assisted, Multi-Single, etc.  Be sure the syntax matches the type
of cluster you are connecting to (select DXNet or DXSpider).  See
http://docs.win-test.com/wiki/DX_Cluster/Packet#Connecting_node for
instructions.


  73,
  Bob, N6TV
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20070831/1aec234e/attachment.htm