[WT-support] RTTY with WT 315

[VE2FWW]

Hello Bob
I have tried scenario 1....and the VFO A doesn't stay on RTTY LSB, it goes RTTY USB
I have also tried scenario 2....and what happens, this is the VFO B that goes on RTTY USB...like the VFO A....
Thanks anyway
I will try again...
NOEL 
  ----- Original Message ----- 
  From: Bob Wilson, N6TV 
  To: Win-Test Reflector 
  Sent: Wednesday, August 08, 2007 17:36
  Subject: Re: [WT-support] RTTY with WT 315


  Noel,

  This may not fix it (I'm not set up for RTTY), but give it a try:

    1.. Move VFO A to an RTTY frequency like 14085
    2.. Put VFO A on RTTY-LSB
    3.. Press A->B so VFO B is also on RTTY-LSB 
    4.. Click on a call in the band map.
    5.. Does the mode of VFO A stay RTTY-LSB?

  If not, try

    1.. Right-Click on a call in the band map
    2.. Click pass frequency to Sub VFO B
    3.. Mode of VFO B should remain RTTY-LSB 
    4.. Press A <> B to put VFO A on the spot's frequency

  73,
  Bob, N6TV 


------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20070808/a4004b5d/attachment-0001.htm