[WT-support] wintest and WAE RTTY

[f6ify]

Olivier F5MZN a écrit :
> Hi agn,
> 
> Thanks to DL4NER, DL6RAI, F6IFY I have been able to get the WAE RTTY leg 
> supported in Win-Test. I would appreciate that RTTY addicts could peep 
> to the development version to see if everything correct and is working 
> as expected.
> 
> You can find the current development version compiled from our (CVS) 
> development trunk here: http://download.win-test.com/nightly/
> 
> Please take a quick look to the #_READ_ME_#.TXT file where you will find 
> instructions in.
> 
> Looking forward to your comments! Thanks in anticipation.
> 
> 73,

Hi Olivier,

     I post on the list to avoid multi report of the same bugs.

Just a quick test before preparing the station for the EUHF. Difficult 
to completely test the RX part without the real battle.

Problems found in version 3.15.0-dev:
  - In band map with Display option / Potential QTC:
     If I fill the band map with another European station the Potential 
QTC show 10, might be 0 or - or nothing.
     from the rule:
13 Special Rules for RTTY:
In the RTTY portion of the WAEDC there are no continental limits; 
everybody can work everybody. Only QTC traffic must be performed between 
different continents.

  - In main window: The up and down arrow keys have no effect, only 
ctrl+home/end and page up/down to navigate in log.

  - If I click on a call during reception of QTC, the call replace the 
one on the main window entry field.

Wish list:
  - A possibility to change the QTCs messages without editing the wt.ini 
file. (After the start of the contest sometimes you wish to optimize the 
messages).

Thanks again Olivier for this very good work.

73 to all.
  Philippe - F6IFY