[WT-support] WT 3.3.5 available

[Kenth Johansson]

Ok Larry. Thats working now. Another question. 
When using F1 and F2 there are 3-5 diddles transmitted after the last letter before changing over to rx. F3-F7 change to rx immidiately. How can I eliminate theese diddles on F1-F2?

Kenth

----- Original Message ----- 
From: "Laurent HAAS - F6FVY" <f6fvy at free.fr>
To: <support at win-test.com>
Sent: Thursday, September 21, 2006 11:35 AM
Subject: Re: [WT-support] WT 3.3.5 available


> Hi Kenth
> 
> Kenth Johansson a écrit :
> 
> > I run WT 3.3.5  together with the microkeyer and MMTTY and have it setup for CQ WW DX RTTY.
> > 
> > Where in the WT can I modify the F1-F7 keys in RTTY mode. In CW it is <options/CW/modify standard messages> but in RTTY mode Options/CW is greyed out.
> 
> AltGr-F1 etc... (AltGr = Right Alt key for some keyboards).
> 
> > I am connected to a cluster via DX telnet but nothing is displayed in the DX cluster window. Why?
> 
> 1/ Is wtDxTelnet installed, started and connected ?
> 
> If not, install, start and connect it.
> 
> 2/ Can you see the data stream in wtDxTelnet ?
> 
> If not, check the cluster you're connected to is not down, or use another.
> 
> 3/ Can you see the data stream in the WT packet wnd (Alt-O) ?
> 
> If not, check the network settings in wtDxTelnet and WT. See 
> http://docs.win-test.com/wiki/DX_Cluster/Telnet
> 
> 4/ Check your options in the Alt-A wnd and the bandplans settings.
> 
> 73
> 
> Larry - F6FVY
> 
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>