AW: [WT-support] Sound card audio routing

Thorsten - DO1ET do1et at df0cg.de
Fri Oct 13 23:06:07 CEST 2006


Hello Mark,

this automatic switch works good! This routing from mic-input to speaker out
is automatically done by windows sound settings.
In Win-Test you have to look at menu "options" and "configure interfaces"
there you can enable the sound card, after that set the first box, that the
mic is muted when DVK is playing, but unset the second box. Then the mic is
not muted when the DVK is not playing.
With this settings the TRX get?s the whole time the signal from mic-input,
you only have to ptt the trx by hand or VOX, if you start the DVK(F1-F7) the
mic is muted when the dvk plays...test and try!


73 de Thorsten - DO1ET


-----Ursprungliche Nachricht-----
Von: support-bounces at win-test.com
[mailto:support-bounces at win-test.com]Im Auftrag von Mark Marsden
Gesendet: Freitag, 13. Oktober 2006 22:24
An: support at win-test.com
Betreff: [WT-support] Sound card audio routing


Hi Larry et al

Can WinTest route the soundcard microphone input through to the soundcard
speaker output?

This is to automatically switch between DVK recordings and live voice.

73 Mark
http://g4axx.com


_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



More information about the Support mailing list