[WT-support] long space after $CORRECTed call

[Steef PA2A]

Larry,

We used two Elecraft K2 's and CW keying comes from COM1, pin nr 4. PTT is 
not used, only the CW signal is applied at the rear of the K2.

Steef - PA2A

----- Original Message ----- 
From: "Laurent HAAS - F6FVY" <f6fvy at free.fr>
To: <support at win-test.com>
Sent: Monday, November 27, 2006 6:43 PM
Subject: Re: [WT-support] long space after $CORRECTed call


> Hi Steef
>
> Steef PA2A a écrit :
>
>> When sending a corrected call with $CORRECT enabled using the numeric +, 
>> there is a longer pause between the corrected call and TU than between 
>> other words, e.g. in sending CQ. The rig and amplifier relays switch to 
>> RX, and TX again before the TU. I did 't use the +++ and --- to change 
>> the speed.
>
> To complete your report, pse specify what kind of keying method you were 
> using ?
>
> Parallel port ? WinKey ? W5XD box ? Other ?
>
> Tnx and 73
>
> Larry - F6FVY
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support