[WT-support] wt.ini: a question and a potential issue?

[G3SJJ]

I have been doing some checks.

Winkey on its own  - speed range set to 15wpm min to 40 wpm max.  Speed 
pot on mH Keyer set to centre position gives 27 wpm.

Logger 32 with CW Machine selected follows Winkey as above. Exactly what 
I want it to do.

N1MM alters the speed range to 10 - 55. Speed pot at centre position 
gives 30 wpm.

Wintest alters the speed range to 20 - 60. Speed pot at centre position 
gives 38 wpm.

Hope this helps.  Chris G3SJJ



Laurent HAAS - F6FVY wrote:
> Hi Bob
>
> Bob I.2.WIJ a écrit :
>
>> I was looking at the wt.ini file trying to find
>> a variable for the CW speed initialization at startup
>> (it always start at 34wpm)
>> BTW is there a mean to vary this start speed?
>
> No, it is an "hardware value" ;-)
>
> But your suggestion is noted...
>
>> Then I looked at the beginning of the file and noted the following:
>>
>> [Files]
>> WorkDirectory=C:\Programmi\Win-Test
>> Path=c:\programmi\win-test3-0\cqww2006cw.wtb
>> LastFileName=cqww2006cw.wtb
>> ....
>>
>> I installed the rel3.0 on a different directory
>> but the .ini file still claim the
>>
>> WorkDirectory=C:\Programmi\Win-Test
>>
>> while the path is correct.
>>
>> Is this a potential problem during execution or not?
>
> AFAIK, the working directory is used to find the various data files 
> (country files, SCP etc...).
>
>> I edited the .ini file and changed the line to
>> WorkDirectory=C:\Programmi\Win-Test3-0
>>
>> Started WT again, but after this it reverted to the previous 
>> WorkDirectory=C:\Programmi\Win-Test
>
> Pretty strange. We have to check.
>
> For everyone : For now, if you're using different ini files (like 
> DL6RAI), it is *very* advisable to create them all in the WT 
> installation directory, with different names.
>
> 73
>
> Larry - F6FVY
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>