[WT-support] CW MESSAGES
9K2HN
9k2hn at 9k2hn.com
Wed Nov 1 06:29:27 CET 2006
I'm using microkeyer by Microham and I have the same problem Don
described, when I press the + key the logged call will be transmitted
even if there is no changes made!! this happen only in ver. 3.5.0.
de 9k2hn
Hamad
> -------- Original Message --------
> Subject: Re: [WT-support] CW MESSAGES
> From: "José Nunes CT1BOH" <ct1boh at gmail.com>
> Date: Wed, November 01, 2006 2:41 am
> To: support at win-test.com
>
>
> I use Win-Test internal Keyer to generate the CW.
> Can't go wrong with that....
>
>
> 73
> José
> CT1BOH
>
>
> On 10/31/06, Don Beattie <g3ozf at btinternet.com> wrote:
>
> Further to the note I sent earlier (below) I now have isolated what causes this problem.
>
> If I select CW from the LPT port, there is no problem
>
> If I select WinKey and attach a V.10 WinKey, the problem appears.
>
> Does anyone know why this is happening ?
>
> 73
>
> Don, G3BJ
>
>
> ----- Original Message -----
> From: Don Beattie
> To: support at win-test.com
> Sent: Tuesday, October 31, 2006 3:44 PM
> Subject: CW MESSAGES
>
>
> I have a strange problem here. I am running 3.5.0 on two computers, and am preparing for CQWW CW.
>
> On one computer, everything is fine. On the second, I have an odd effect when I use the "+" key to send TU etc. IN EVERY case, it sends the other callsign followed by the rest of the exchange. I expect it to do this when I have changed the call, but not when there is no change. The message in "+" is $CORRECT TU $MYCALL $CR. I have looked for a setting that could cause this problem, but cannot find anything. Does anyone know what causes this problem ?
>
> 73
>
> Don, G3BJ (and G5W)
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
>
>
> --
> José Nunes
> CONTEST CT1BOH - http://www.qsl.net/ct1boh
> ---------------------------------------------------------------------
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
More information about the Support
mailing list