[WT-support] CW MESSAGES

[José Nunes CT1BOH]

I use Win-Test internal Keyer to generate the CW.
Can't go wrong with that....


73
José
CT1BOH


On 10/31/06, Don Beattie <g3ozf at btinternet.com> wrote:
>
>  Further to the note I sent earlier (below) I now have isolated what
> causes this problem.
>
> If I select CW from the LPT port, there is no problem
>
> If I select WinKey and attach a V.10 WinKey, the problem appears.
>
> Does anyone know why this is happening ?
>
> 73
>
> Don, G3BJ
>
>
> ----- Original Message -----
> *From:* Don Beattie <g3ozf at btinternet.com>
> *To:* support at win-test.com
> *Sent:* Tuesday, October 31, 2006 3:44 PM
> *Subject:* CW MESSAGES
>
>
> I have a strange problem here. I am running 3.5.0 on two computers, and am
> preparing for CQWW CW.
>
> On one computer, everything is fine. On the second, I have an odd effect
> when I use the "+" key to send TU etc. IN EVERY case, it sends the other
> callsign followed by the rest of the exchange. I expect it to do this when I
> have changed the call, but not when there is no change. The message in "+"
> is $CORRECT TU $MYCALL $CR. I have looked for a setting that could cause
> this problem,  but cannot find anything. Does anyone know what causes this
> problem ?
>
> 73
>
> Don, G3BJ (and G5W)
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>


-- 
José Nunes
CONTEST CT1BOH - http://www.qsl.net/ct1boh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20061031/56325b6c/attachment.html