[WT-support] FT-900 & FT-857D

[Olivier F5MZN]

Hello,

Back on the FT-900 and FT-857D problems ...

As there is surely something wrong in Win-Test, I'd like to get a debug 
trace from you.

To enable the debug trace, follow the following steps:

1) Download and install Win-Test 2.18.3 (last versions are not working 
as expected for debugging) from 
http://download.win-test.com/wt-2.18.3-update.exe

2) open C:\Program Files\wt.ini with notepad

3) add, at the end of the file, the following lines (replace Com1 by the 
com port number your radio is connected to):
[Debug]
Com1 = h

4) run Win-Test for a couple of minutes (please do not try to do 
anything else, just run win-test without changing anything on your radio 
or in Win-Test).

5) Stop Win-Test

6) Send the debug files C:\Program Files\Win-Test\COM1_debug.txt" (or 
any other COM port according to the one you used) to me at 
olecam at f5mzn.org as an email attachment.

Thanks in anticipation,

73,
-- 
Olivier / f5mzn