[WT-support] paket cluster via KAM
Filipe Lopes
ct1ilt at mail.telepac.pt
Mon Jul 24 00:28:23 CEST 2006
Hi Braco,
well first you have to set your TNC to KISS mode!
after that you make sure you have the following commads correct:
MON OFF
AUTOLF ON
MALL ON
in WIN-TEST - options>config interfaces - you set your COM port and Baud
rate (if its wrong baud rate it wont work!! mine is set for 9600b) then it
should work.
I also had to change in Options>DX CLuster shortcuts> Syntax>DXspider but
of course it depends if you using Telnet or Packet!
Hope it works for you!
73's Filipe CT1ILT aka CT6A, 6Y3T
----- Original Message -----
From: "Braco OE1EMS" <oe1ems at emssolutions.at>
To: <support at win-test.com>
Sent: Sunday, July 23, 2006 11:22 PM
Subject: Re: [WT-support] paket cluster via KAM
> hi filipe!
>
> i had same problem here in IARU contest
>
> how did you menaged that?
>
> 73
> ems
>
> ----- Original Message -----
> From: "Filipe Lopes" <ct1ilt at mail.telepac.pt>
> To: <support at win-test.com>
> Sent: Monday, July 24, 2006 12:19 AM
> Subject: Re: [WT-support] paket cluster via KAM
>
>
>>I managed to pu it working! Tnx anyway
>>
>>
>> =)
>>
>>
>>
>> ----- Original Message -----
>> From: "Filipe Lopes" <ct1ilt at mail.telepac.pt>
>> To: <support at win-test.com>
>> Sent: Sunday, July 23, 2006 11:06 PM
>> Subject: [WT-support] paket cluster via KAM
>>
>>
>>> Hi all,
>>>
>>> today my challenge was to set up the packet connection in WIN-TEST.
>>>
>>> I was able to connect to my local packet cluster from WIN-TEST the thing
>>> is that I dont get any spots on my DX-Cluster window, nor in the band
>>> map.
>>> I have tryed to write SH/DX in the ATL-T function but I still dont get
>>> any spots!
>>>
>>>
>>> Any ideas~?
>>>
>>>
>>> thanks!
>>>
>>> Filipe Lopes CT1ILT aka CT6A
>>> _______________________________________________
>>> Support mailing list
>>> Support at win-test.com
>>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>>
>>>
>>>
>>> --
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date:
>>> 21-07-2006
>>>
>>>
>>
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21-07-2006
>
>
More information about the Support
mailing list