[WT-support] DX Cluster connection Ver 3.7.0

[Dave Zeph]

Lew ..... on the Win-Test-->OPTIONS-->DXCLUSTER-->LOCAL wtDxtelnet there is
a START/STOP AUTOMATICALLY "pick".

Also, in OPTIONS-->CONFIGURE INTERFACES, the Ethernet Network must be
enabled - and the Broadcast Address be set to match that set up under
wtDxTelnet's WIN-TEST NETEORK PROPERTIES Window and compatible with the
subnet used by your Router.  A workable Broadcast Address for use in
wtDxtelnet and Win-Test may be 127.255.255.255.



73 ---> Dave, W9ZRX



-----Original Message-----
From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Lewis Cheek
Sent: Monday, 11 December, 2006 23:08
To: support at win-test.com
Subject: [WT-support] DX Cluster connection Ver 3.7.0

Using ALT-T brings up the window, however both "conn" and "bye" are grayed
out, how do I connect to cluster?

I'm using AR to connect via internet and then using a Local node 127.0.0.1,
port 7300 to connect Win -Test. I have stDX Telnet running.

73
Lew

_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support