[WT-support] ORION II CAT problem with EZMaster

[HRS I4UFH]

The 3th solution... !!

73 I4UFH


----- Original Message -----
From: "Nick J. Sinanis F5VIH/SV3SJ" <f5vih at free.fr>
To: <support at win-test.com>
Sent: Saturday, December 02, 2006 9:49 PM
Subject: Re: [WT-support] ORION II CAT problem with EZMaster


> Hi,
>
> FYI: OII Firmware version 2.037J seems to fix precisely that issue with
> incorrect baud rate.
>
> 73's Nick
>
> HRS I4UFH wrote:
> > Hi Tonno,
> >
> > it's a Orion // issue, that we I and Oliver had showed in Germany in
June
> > with TenTec Guys. The real speed of the Orion // is 61/62 Kb instead of
> > 57.6K. The PC comport  had more tollerance that EZMaster ComPort .There
are
> > no workaroud for now, first option is a firmware patch that replace
57.6K
> > with 61K, other option ( the best one )  is that WT select 61K as speed
only
> > when an Orion // is selected.
> >
> > Easy to do both, need to look for the shortest ...
> >
> > Oliver what do you think ?
> >
> > Fabio I4UFH
> >
> >
> >
> > ----- Original Message -----
> > From: "Tõnno Vähk" <Tonno.Vahk at gildbankers.com>
> > To: <support at win-test.com>
> > Sent: Saturday, December 02, 2006 8:49 PM
> > Subject: [WT-support] ORION II CAT problem with EZMaster
> >
> >
> > I know there were a few emails on this OII topic but I ask what is
present
> > satus of those users.
> >
> > I managed to connect OrionII directly to laptop with WT through serial
cable
> > and the CAT works perfectly with default ORION settings.
> >
> > Now it does not work through EZMaster. I use the same default ORION
settings
> > in EZMaster COnfguration window - 57600, 8, N, 1. And in Configure
> > Interfaces I use default EZMaster settings - 19200, 8, N, 1, CW, PTT,
both
> > Radios. I have tried to change the EZM settings but have not find a
cure. I
> > don't get any frequency reading to WT through EZM with those settings.
Some
> > other functions though seem to work although I am not sure now which.
> >
> > Am I doing something wrong or is there a still some known problem with
this
> > setup (like the baud rate or sth..)?
> >
> > 73
> > Tonno
> > ES5TV
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
> >
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>