[WT-support] CI-V Interface to Icom is WinTest different than CT?

[9K2HN]

Hi Olivier,

     I'm facing the same problem Tim talked about. My Radio is ICOM
IC-756 PRO III and microkeyer, I feel also it is a win-test problem
because the Frequency changes very fast in microkeyer Router program.

de 9k2hn
Hamad

P.S: No problem with my Mult station radio FT-1000 Mark-V (also with
microkeyer)

> -------- Original Message --------
> Subject: Re: [WT-support] CI-V Interface to Icom is WinTest different
> than CT?
> From: Olivier F5MZN <olecam at f5mzn.org>
> Date: Thu, August 31, 2006 9:11 am
> To: support at win-test.com, zephd at indy.rr.com
>
> Hi -
>
> Tim Duffy K3LR wrote:
> > Oliver ..... I have set the CI-V TRANSCEIVE Option to OFF and it doesn't
> > seem to make any difference.
> >
> > When the Dial is turned suddenly, it takes 1-2 Seconds for the Bandmap
> > Frequency to change.
> >
> > The only way that the Bandmap Frequency changes at a steady, continuous rate
> > is to turn the Dial VERY VERY SLOWLY.
> >
> > It does not update at the rate we are used to in CT - there's no doubt about
> > that.  We are used to the Bandmap Frequency changing much more rapidly in
> > CT.
> >
> > I don't care if the implantation is the same as CT, but it's VERY IMPORTANT
> > to us that it work as well as CT.
> >
> > Right now I would classify this as a SHOW STOPPER.
>
> Anybody else noticed the same result with Icom radios?
>
> 73,
> --
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support