[WT-support] Jorge EA9LZ, what to do with dxtelnet

[F5HRY]

Hello Jorge,

In WTdxtelnet, you need to open the "Win-Test communication network properties".

Then enter the following datas :
IP address : 127.0.0.1
Port : 9871
Application : Telnet
Enable the communication with WinTest

In Win-Test, open the window "configure interfaces", and :
- Check : enable ethernet network
- Default broadcast address is OK
- Port number 9871

For the bandmap, it look like you badly configured the radio interfaces.
But I am not really sure about what you are asking for.
Check the serial ports settings (number, speed, etc ..). 

Hope that helps.

Vy 73
Herve F5HRY

  ----- Original Message ----- 
  From: Jorge Taboada 
  To: Support at win-test.com 
  Sent: Friday, November 25, 2005 6:59 PM
  Subject: [WT-support] Jorge EA9LZ, what to do with dxtelnet


  Well I have problems with the dxtelnet

    1.. I do all step by step I found in the help line for configurated, but not working at all. 
    2.. about bandmap, when I am doing double click in the bandmap frequency there is not any change or any response fromthe program, where is my misstake?


------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20051125/a22f3a28/attachment.htm