[WT-support] VE7CC AR Cluster/Dx Spider User Program

[Simon Pearson]

Fabio,

> Just only one compliant, don't know if is a VE7CC or WT feature/bug, the
> BandMaps fills only when new spot flows, with the string "DX de", don't fill with a
> show DX, frequently when you change band or connection were down you need to refresh your
> bandmap, mult's table and a SH/DX it's very usuful. Is there any workaround ?

Are you connecting to a DX Spider node? If indeed you are, you can 
use the command "SH/FDX" (note the 'F' character before 'DX') which 
does *exactly* the same as "SH/DX" (i.e. shows last XX spots), but 
formats them in the same way as normal spots.

Let me give you an example. Here's the output from "SH/DX/3" (show 
last 3 spots):
24945.0 FT5XO     21-Mar-2005 0839Z  worked 24952 <IZ0FMA>
21260.0 JR1AYW    21-Mar-2005 0839Z                <OK2ZO>
18080.5 EY8/UA4CC 21-Mar-2005 0839Z  FB 599+ tnx  <OK1UXH>

Like you say, the above spots do not start with "DX de". However, 
here is the output, using the "SH/FDX/3" (show last 3 spots in "DX 
de formatting mode"):
DX de IZ0FMA:    24945.0  FT5XO        worked 24952.  39 0839Z 15
DX de OK2ZO:     21260.0  JR1AYW                      25 0839Z 15
DX de OK1UXH:    18080.5  EY8/UA4CC    FB 599+ tnx    17 0839Z 15

See now the spots start with "DX de", just like "normal" inbound 
spots? :-)

So Fabio please do try it out and let me know how you get on. Hope 
this helps!

73,

-- 
Simon Pearson, M0CLW
* CDXC * WWYC * UKYC