[WT-support] SO2R - CQ Repeat stops

[Bob I.2.WIJ]

Hi all,
just bought my WT license B4 arrl and wanted to 
test it in advanced SO2R with my EZMaster to gain
experience. Not much time to play, anyway.

Started with one radio, no scenarios was defined for
SSB, and all the F1-4 keys were working ok.

(sometimes the ESC after AltGr-Fx to record a message
didn-t work at the first time, and ha to hit twice to
stop recording)

F1-4 messages were playing ok ant the headphones
stayed ok (just one radio) and REPEAT worked ok.

Then I activated the second radio but, with no 
defined scenarios, only "*", to swap radios, was
possible to hear the second radio.
I think this is correct.

(may be with a manual setting in EZMaster would have
been possible, but I didn't tried it. I will do.)

Then I defined SSB scenarios with the supplied wizard.
Hit F1 for playing my CQ-TEST message, (Plain pileup 
selected). All semed ok, heard 2nd radio while cqing,
then back to R1R2 (split headphone).
After the repeat interval expired again all seemed ok,
but after the next cq-message on F1 had played, the 
headphone stayed on R2R2 and the CQ cycle stopped.
The REPEAT was still displayed on the bottom line 
of the RATE window but it didn't started again.

73

Bob, I2WIJ
http://www.qsl.net/i2wij/


	
		
__________________________________ 
Celebrate Yahoo!'s 10th Birthday! 
Yahoo! Netrospective: 100 Moments of the Web 
http://birthday.yahoo.com/netrospective/