[WT-support] win-test

[Tom Wylie]

Hello Olivier

well I am not a computer expert  hihi..

Reference the speed. - yes it happens at any speed.   I have turned the 
speed pot of the microKEYER down to zero to try to let win-test control the 
keyer, but it was still varying.

However, Jozef, OM7ZZ has given me  some different settings and on a trial 
it appears to be much better, as long as I dont touch the speed pot on 
microkeyer and use the ALT-F9 etc.   I must try it soon in a real contest 
and see how it behaves.    I hate writelog so I am looking for something 
much better hihi.   So far, wintest looks OK..

73 de tom
gm4fdm

----- Original Message ----- 
From: "Olivier F5MZN" <olecam at f5mzn.org>
To: <support at win-test.com>
Sent: Monday, June 20, 2005 7:38 PM
Subject: Re: [WT-support] win-test


> Hello Tom,
>
>> I just downloaded and registered Win-test.   Can somebody who is 
>> operating it with an FT1000MP advise me of the rig/com port settings.   I 
>> can hear the CW perfect on the computer speaker, but it does NOT key the 
>> rig..
>
> It depends of the Interface used for keying your rig. If it is connected 
> to the COM port, you usually need to configure the COM port with DTR to CW 
> and RTS to PTT.
>
>> I have also tried with OM7ZZ  microKEYER.   This does key the rig but the 
>> sending speed does not appear stable and varies.   Its as though wintest 
>> is fighting with winkey????
>
> This has never been reported before. Could you please tell me more about 
> your computer configuration? Does it appear at any speed?
>
>> I will be in Germany this weekend.
>
> We will be too. See you on stand A013 of the B1 hall!
>
> 73,
> -- 
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>