[WT-support] Feature Proposals

["Büttner, Bernhard, FCI1"]

Jose,
 
You can do that easily.
 
1. Press Shift-F3 to load "TU $MYCALL" into that memory.
2. Press Shift-[+] (the + key on the numeric key pad) to load only "TU"
there.
 
Now run the pileup.
To finish the QSO with "TU" press [+].
To finish the QSO with your callsign, press F3.
 
73 Ben, DL6RAI

________________________________

	From: support-bounces at win-test.com
[mailto:support-bounces at win-test.com] On Behalf Of JOSE CARLOS NUNES
(ACE-DDSB-Direcção)
	Sent: Tuesday, June 14, 2005 1:57 PM
	To: support at win-test.com
	Subject: RE: [WT-support] Feature Proposals
	
	

	the case is not solved. 

	There should be a short confirmation message which is the current
"+" key, and there should be another key for a long confirmation message.
This is necessary for advanced SO2R mode.

	What I do now is: 

	+ key has just "TU" and I add F4 to send my call 

	So every QSO I enter in the log I hit "+" for a short confirmation
message or if I want to send a long confirmation message I hit + and then
F4. In advanded SO2R there is a little gap in reception and delay of the
inactive radio because of the two different keys and more importante the
operator has to push 2 keyboard keys.

	The best solution is to have two confirmation messages (just like TR
softwaare) in the standard CW messages windows, and then is up to the
operator and to the pile-up situation to send the short or the long
confirmation message.

	73 
	José Nunes 
	CT1BOH 


	-----Original Message----- 
	From: marko.holmavuo at dnainternet.net 
	[mailto:marko.holmavuo at dnainternet.net] 
	Sent: terça-feira, 14 de Junho de 2005 8:01 
	To: support at win-test.com 
	Subject: [WT-support] Feature Proposals 


	Fine, 

	Didn't evaluated that. So case is solved:) 
	It is easy to remap this F3 key in some other key also if you want
to get it 
	closer to + key. 

	73 Marko OH4JFN 


	>Manfred is right - Win Test (opposite to CT) makes a difference
between the 
	>[+] key and [F3]. 
	>Reprogramming [F3] will not change [+]. I think this is the best
solution 
	>for all. 

	>> 
	>> I take F3 for the short TU, the blank serial number which is 
	>> there,is not needed in my opinion. 
	>> 
	>> 73 de Manfred, DJ5MW 
	>> 
	_______________________________________________ 
	Support mailing list 
	Support at win-test.com 
	http://www.f5mzn.org/cgi-bin/mailman/listinfo/support