[WT-support] Re: iCOM Polling

[I4UFH]

Last time were in Germany were I had show to Oliver that with lower speed 
connection seem to be more smooth the freq. update when rotating knob . 

Did you remember Oliver ? 

73 Fabio 


I4UFH Scrive: 

> An old mail from Oliver suggest to leave transceiver  off  
> 
> Early WT version didn't poll ICOM radios so the only way where to have 
> TRANSCEIVER ON. After a while, first months of the year, ICOM has been 
> started to be polled and until last version it worked ok, last time were 
> tested with 751 and 781 in May during ARI Contest, after that no chance to 
> work again.  
> 
> 73 de Fabio I4UFH  
> 
> Laurent HAAS - F6FVY Scrive:  
> 
>> Hi Matthias  
>> 
>> Matthias Jelen a écrit :  
>> 
>>> I guess it´s the same probleme I had with my TenTec OMNI VI. It should 
>>> be
>>> compatible to ICOM. I tried to run it both as OMNI VI, IC735 and IC706 
>>> and
>>> got always the same result: Direction PC -> radio works, but not vice 
>>> versa.  
>>> 
>>> The radio was connected directly to the COM - port.
>> 
>> I think Phil F6IFY also owns a TenTec OMNI VI and use it with Win-Test. 
>> Maybe is it only a setting issue...  
>> 
>> In the meantime, if I remember well, and if this setting does exist in 
>> your TenTec (?), check that "CI-V Transceive" is ON.  
>> 
>> HTH  
>> 
>> 73  
>> 
>> Larry - F6FVY  
>> 
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>  
> 
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support