[WT-support] Wint-Test 2.6. beta and Winkey F5 key problem

[F6IFY]

Hi,
  Bingo! It works with a space after the message.
If you press twice the F4 key our call was sent without space -->
F6REFF6REF. I suppose if I add a space at the end of this message I will get
an extra time to switch the TRX relay. Unfortunately our setup is not full
QSK and time delay is important during Run.
When we (M/S) change (during Ref Cup) the internal keyer speed during
transmission only from 30 to 28 WPM the speed drop to about 15WPM. The next
transmission is correct at 28WPM. There is no problem if we change the speed
during RX.
 Apart this two (not really) annoying problems, Wintest works flawlessly
during the 36 hours of the contest. A second PC was connected for backup on
the same network: no reboot, no QSO lost! 
The "Compare objectif" feature is really a must, congratulations to the
development team.
It is the reason we take the risk with the beta version (and F6REF is
"CHECKLOG" for this contest: it gives the 00 multi and a really nice QSL
specially done by F5SDT for this event - See you in SSB part ;-)

73 de Philippe - F6IFY 

> -----Original Message-----
> From: support-bounces at win-test.com 
> [mailto:support-bounces at win-test.com] On Behalf Of f6fvy at free.fr
> Sent: Saturday, January 29, 2005 4:06 PM
> To: support at win-test.com
> Subject: RE: [WT-support] Wint-Test 2.6. beta and Winkey F5 
> key problem
> 
> Hi Philippe
> 
> Selon F6IFY <f6ify at free.fr>:
> 
> > I found a workaround :
> > Just put $SPACEBAR after the $LOGGEDCALL in the F5 key and 
> problem is 
> > gone...
> 
> Well done !
> 
> Just an idea : Maybe a simple space character after 
> $LOGGEDCALL is enough ?!
> 
> Good luck
> 
> Laurent
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>