[WT-support] Flex-Radio SDR1000 and CAT with Win-Test

Tim Ellison tellison at itsco.com
Sun Dec 4 18:01:31 CET 2005


I collect BOTH :-) 


-Tim
---
Integrated Technical Services 

"You can't close the door when the walls cave in" --Robert Hunter

-----Original Message-----
From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Sauvageot, Christoph
Sent: Sunday, December 04, 2005 3:10 AM
To: support at win-test.com
Subject: AW: [WT-support] Flex-Radio SDR1000 and CAT with Win-Test

Most of us collect QSL's - some COM ports :-)

73 Chris

-----Ursprüngliche Nachricht-----
Von: support-bounces at win-test.com [mailto:support-bounces at win-test.com] Im
Auftrag von Tim Ellison
Gesendet: Samstag, 3. Dezember 2005 21:00
An: support at win-test.com
Betreff: RE: [WT-support] Flex-Radio SDR1000 and CAT with Win-Test

I need com9 or com10 since I already have 8 physical com ports in the PC.


-Tim
---
Integrated Technical Services 

"You can't close the door when the walls cave in" --Robert Hunter

-----Original Message-----
From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Olivier F5MZN
Sent: Saturday, December 03, 2005 7:35 AM
To: support at win-test.com
Subject: Re: [WT-support] Flex-Radio SDR1000 and CAT with Win-Test

Hi Tim,

> I would like to use my Flex-Radio SDR1000 (_www.flex-radio.com_
> <http://www.flex-radio.com>) interfaced to Win-Test.  Currently, the 
> SDR1000 uses the Kenwood TS-2000 CAT commands as the core subset of 
> CAT commands and has extensions to the Kenwood command set for SDR1000 
> specific operations.
> 
> Since Win-Test currently supports the TS-2000, this aspect of 
> interfacing the SDR1000 to Win-Test shouldn't be a problem.
> 
> My problem is that the SDR1000 uses virtual com ports for CAT control.  
> There is no physical com port on the radio.  Win-Test only shows the 
> physical com ports for interfacing radios (and other devices).

Win-Test can handle virtual COM port as well. What is the (virtual) COM port
number the SDR1K driver is attached to?

73,
--
Olivier / f5mzn
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 4487 bytes
Desc: not available
Url : http://www.f5mzn.org/pipermail/support/attachments/20051204/dfcd3385/smime.bin


More information about the Support mailing list