[WT-support] several observations

[Manfred Wolf]

Hi all,

I testes a few things at my station and am not sure, if it`s my fault or bugs:

Radio1: IC735 via CT17 and USB-serial adapter
Radio2: TS850 via interface and USB-serial adapter

radio control works o.k. under N1MM.

problems:

- IC735 radio control doesn`t work. switching mode with ctrl/F1/F2 works, but frequency readout or bandchange don´t work. IC735 is set to: 1200 Bd, 8, N, 1 DTR and RTS Always off -> same settings work with N1MM

- switching modes with shift/ctrl/F1/F2 doesn`t work in 2nd radio window (workes ok, when TS850 is radio1

- voice messages from my ZS4TX keyer are not being sent to radio 2 (using shift/F1-F4). It works ok in CW

- you can`t enter a frequency in 2nd radio window to QSY somewhere, message "error in field" is displayed, so 2nd radio QSY should be done on the radio?

- changing radios with " * " doesn`t work here. (on a German keyboard)

- The big "insert" key on the right side of the keyboard doesn`t work, it writes " 0 " into the 2nd radio window regardless of Num lock or Caps lock is on or off. the small insert works. When trying to redefine the big insert key it seems to be the same number as the small one?!

Is there any German user, who can confirm this or tell me, what I´m doing wrong?

As my shack is 40km away I can test radio control things only abt once a week, when I´m there.

Thanks in advance.

73 de new user Manfred, DJ5MW
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://numerobis.f5mzn.org/pipermail/support/attachments/20050417/cae9c80d/attachment.htm