[WT-support] WT 2.14.0 release

[Olivier F5MZN]

Hi -

WT v 2.14.0 is out. This version comes with different bugfixes, and WT 
is now compliant with the new rules 2005 of the YU DX Contest. More 
informations are available in the above release file.

http://download.win-test.com/wt-2.14.0.exe [full version, 3.3 Mb]
http://download.win-test.com/wt-2.14.0-update.exe [update, 1.7 Mb]

Best 73 de Olivier / f5mzn and the WT team

Release file
------------
- Bugfix: Main and sub VFOs was inverted in split mode with various
   Icom radio (IC-756Pro, ...). Tks W5GN & I4UFH.

- Added rigs: Icom IC-756proIII, Tentec Omni VI.

- Bugfix: IC756 address fixed. Tks F6IFY.

- YU DX Contest : WT is now compliant with the new rules 2005. Tnx F5IN
   and YT1NT/VA3TTN.

- WPX : Mults Window (Alt-M) : The "copy as text" menu item now works.

- Status window (Alt-J) : You can now display Radio 1 frequencies only,
   to save some screen space. Tnx M0CLW.

- To avoid unwanted behaviour, grabbing a spot from the spot list (Alt-A)
   or the radio bandmaps is now allowed only if the cursor is located on
   the last line of the log. Tnx M0CLW @ G6PZ.

- Radio windows : Spot list tab : Scrolling capability added. Tnx W8JY.

- Bugfix : RDXC : The /MM stations are no more counting for DXCC mults.

- Bugfix : RDXC : Typo in the CTY_OBL.DAT file. UA4C and UA4D callsigns
   were resolved as an unknown "EU" oblast instead of "SA". This file is
   updated in the Win-Test download site, in the /databases directory.

- Bugfix : Mixed category - Networked M/* : After editing a logged QSO,
   the networked stations might get a wrong Rcvd report if they were not
   set in the same mode as the edited QSO. Tnx M0CLW @ G6PZ.

- Bugfix : Mixed category : When grabbing a spot from the radios or the
   spots windows, the default reports were not adapted if required by a
   mode change.

- Bugfix : RDXC : The sent serial wasn't displayed in the log. It was
   very annoying if you wanted to edit it ! Tnx M0CLW @ G6PZ.

- Bugfix : WAEDC : The sent serial wasn't displayed in the log and you
   were not able to edit it.

- Bugfix : DXPed logs : The default CW F2/F3 messages included a $ZONE
   variable which is irrelevant for a DXPed log. Tnx M0CLW.