[WT-support] Progress and a question or two

f6gox f6gox at free.fr
Sun Sep 26 20:21:16 CEST 2004


Hi Pete and Oliver
I used TopTen devices DXD and WT with 2 X FT-990 + 2 X FL-7000 and 2 X 
microHAM Band Decoder.
The "*" works well here.

73 Laurent
F6GOX

Olivier F5MZN a écrit :

> Hi Pete,
> 
>> Well, I have the program controlling both radios now - a Mark 5 (Radio 
>> 1) and a TS-930/PIEXX (Radio 2).  My radios are both switched and 
>> keyed by a TopTen DXD controller, which has only one CW output, which 
>> it switches from one radio to the other under command of the computer.
>>
>> I can switch radios fine with the mouse, although the numeric "*" key 
>> does not seem to work.  It switches the program's focus but does not 
>> switch the DXD through the LPT port.  When I switch radios with the 
>> mouse, the DXD switches and the CW goes to the right radio.
> 
> 
> I don't have any DXD under hand for trying but I checked the operation 
> of the key * and the output for radio 1/2 on the parallel port seems to 
> work as expected. Can you verify again, with "radio 1" selected in the 
> LPT1 interface?
> 
> Thank you,



More information about the Support mailing list