Re: [WT-support] Supported rigs - Radios supportées

John Coleman vk6nu at
Sun Sep 12 14:25:33 CEST 2004

Hi all

Rig info here at the moment. FT-847 not supported yet. 2nd Radio Icom Ic-728
as follows.

Radio 1 1200 8 N 1 (FC)None

WT.INI File changed as follows
Icom Generic Radio 1=38h

This works fine.

On the DVK messages and Audacity, I have recorded messages in WT then
modified them in Audacity and brought them back into WT as a .wav file and
it works fine provided you the set the  Project Rate in Audacity to 8000
bottom left corner. Otherwise the messages play way too slow. I have got my
PTT keying through the LPT1 using Radio-1 and using the single 2N4001
transistor set up. but would still like it as a 2nd Com Port option sometime
in the future.

----- Original Message ----- 
From: "Laurent HAAS - F6FVY" <f6fvy at>
To: <support at>
Sent: Sunday, September 12, 2004 6:50 PM
Subject: [WT-support] Supported rigs - Radios supportées

> Hi !
> While we're on it, we're trying to gather all information for supported
> rigs and configurations set by users in one page.
> If your rig is connected to Win-Test and working, please be kind enough
> to reply to this post, indicating :
> - Radio (ex ICOM IC-xxx)
> - Interfaces dialog drop list choice if rig is not listed (ex Icom
> - COM port settings (speed, data bits, stop bits, handshake)
> - Special requirements (ex : IcomGenericRadio1=66h in the wt.ini
> [Interfaces] section).
> We specially need reports from *Non-Kenwood* users as this kind of TRX
> seems to be the most standardized one !
> Thanks !
> Larry - F6FVY
> ------------------
> Bjr
> Pendant que l'on est sur ce sujet, nous essayons de rassembler toutes
> les infos concernant les transceivers pour les mettre sur une page d'info.
> Si votre TRX est connecté à WT et que cela fonctionne, merci de répondre
> à ce mail en indiquant :
> - Le type de TRX (ex ICOM IC-xxx)
> - Le choix utilisé dans la liste déroulante dans le dialogue Interfaces
> si ce modèle n'est pas directement listé (ex Icom Générique).
> - Les réglages du port COM (vitesse, bits de données, bits de stop,
> handshake).
> - Infos supplémentaires (par ex l'ajout d'un IcomGenericRadio1=66h dans
> la section [Interfaces] du wt.ini).
> Nous sommes particulièrement intéressés par des reports d'utilisateurs
> de Non-Kenwood, car cette marque semble être la plus standard de toutes
> sur ce sujet.
> Merci !
> 73
> Laurent - F6FVY
> _______________________________________________
> Support mailing list
> Support at

More information about the Support mailing list