[WT-support] Question on Win-Test and W5XD keyer

[F6IFY]

Hi Nick, 
    I am also an happy owner of a W5XD multikeyer.
    The * (hash mark) works well before, but I will check with the last
version 2.2.6 tonitgh (I am at work now).
    Please describe how your two radios and the multikeyer are connected
(second radio com port on the multikeyer or not). I will try the same com
port setting.  
73 de Philippe - F6IFY
P.S.: I have also an USB to 4 comport box to try. (Edgeport/4 from Digi)

> -----Original Message-----
> From: support-bounces at win-test.com 
> [mailto:support-bounces at win-test.com] On Behalf Of Nick Lekic
> Sent: Tuesday, November 30, 2004 3:39 AM
> To: support at win-test.com
> Subject: [WT-support] Question on Win-Test and W5XD keyer
> 
> Hi
> 
> I am playing with the demo version of Win-Test.    This is a 
> very nicely 
> designed contest logging software.
> 
> I have a question about W5XD keyer which I own.   I can't seem to be 
> able to switch between L and R radios.   The manual says a '*' (hash 
> mark) should be used but at least here nothing happens when I 
> try to use 
> it.   Same goes if if I try to select it from Commands --> 
> Active Radio 
> --> Swap Radios *  menu option.
> The only way I am able to switch between L/R radios is by 
> clicking on the Frequency readout on the Radio1 / Radio2 bandmaps.
> 
> Also.  Is there any way to control cw-to-ptt delay for W5XD 
> PTTs from Win-Test?
> 
> Using Win-Test 2.2.6 demo on Windows 2000 PC here.
> 
> 73,  Nick
> ve3ey
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>