[WT-support] WT v 2.5.0 available

[Olivier Le Cam]

Hi,

Version 2.5.0 is now available. This version comes with the 
Hamarraysolutions S02R interface "EZMaster" partially supported.

You can download it as usual from the download site: 
http://download.win-test.com/wt-2.5.0.exe

Release 2.5.0:
- Bugfix: WinKey: the speed changes of CW were not taken into account
   during when transmitting.

- Bugfix: In SO2R, the mixed mode (a different mode by radio) was not
   correctly managed.

- First step in implementation of the Hamradiosolution EZMaster SO2R
   interface in advanced mode. All SO2R features are supported: radios
   switching, internal DVK, internal WinKey interface. The antenna matrix
   outputs are also operational, although there is no user interface to
   define the configuration yet. While waiting for the "matrix
   configuration" window in WT, that can be done manually in the file
   "WT.INI" in the section [EZMaster]. Four numbers respectively
   represent the decimal equivalent values of the binary settings for
   RX/Radio1, TX/Radio1, RX/Radio2, TX/Radio2. The following example
   shows what it is necessary to indicate to activate the bit 0 on 160,
   the bit 1 on 80...

   [EZMaster]
   Matrix at 160 = 1 1 1 1
   Matrix at 80 = 2 2 2 2
   Matrix at 40 = 4 4 4 4
   Matrix at 20 = 8 8 8 8
   Matrix at 15 = 16 16 16 16
   Matrix at 10 = 32 32 32 32

   This [EZMaster] section will probably not exist yet in your file
   wt.ini, but it is enough to add it to the end so that it is taken into
   account with the next restarting.

   The support of the CAT ports and serial lines will be the subject of
   a forthcoming update.

-- 
Olivier Le Cam
CRDP de Versailles