[WT-support] Release of the day!...

[Olivier F5MZN]

Dear WT users,

I'm glad to inform you that a new release is available today! This time, 
  a bug with the PTT output on the COM was fixed (tks MM0EAX). Moreover, 
the WinKey interface of K1EL is now supported by Win-Test! Special 
thanks to Steven K1EL, who really done a nice job with his WinKey interface!

http://download.win-test.com/wt-2.4.0.exe

2.4.0

- The K1EL WinKey is supported (experimental). The interface can be
   configurated in the menu "Option | Configure WinKey...".
   - Keying mode: Iambic A, Iambic B, Ultimatic and Bug (semi-automatic)
   - Second output: you can use the pin 5 of the WinKey interface to
     control the PTT, connect a highspeaker to monitor CW, or
	connect the keyer input of a second radio (SO2R).
   - Sidetone frequency: only relevant if the pin 5 is used for
     monitoring CW.
   - Short spaces, also known as "CT spaces": to reduce wordspace time
     by one dit.
   - Paddle Watchdog: will disable the paddle after 128 consecutive
     dits or dahs. This is to guard against the paddles being accidently
	keyed continuouslt.
   - Autospaces: if you pause for more than one dit time between a dit
     or dah, WinKey will interpret this as a letter-space.

   The half baud CW character is supported by WinKey version 9 and
   later.

   The WinKey interface can be feeded but the COM port: set DTR and
   RTS to "Always On" in the COM port option window.

- PTT output on COM port is working again. Tks MM0EAX.

73,
-- 
Olivier / f5mzn